Anest-iwata LPH80 Bedienungsanleitung PDF herunterladen

－ 1 －

HVLP Compliant Spray gun

Low Volume Low Pressure

Important

Be sure to observe warnings and cautions in this instruction manual.

If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.

Be sure to observe following marked items which are especially important.

Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or property

damage.

Important

Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the minimum

necessary conditions. Follow national and local regulations regarding fire prevention, electricity and safety as well as

your own company regulations.

■

Main specifications

Recommended conditio

Model

Type of

feed

Nozzle

orifice

φmm (in)

Air cap

Set

Mark

※1 Atomizing

air pressure

MPa (bar /PSI)

ir pressure inside

air cap

MPa (bar /PSI)

※2

Fluid output

ml/min

Air

consumption

l/min (cfm)

※2

Pattern width

mm (in)

Air & fluid

connection

Mass

g (lbs)

LPH-80-042G

0.4(0.016) 8 40(1.6)

-062G

0.6(0.024) 25 60(2.4)

-082G

0.8(0.032) 45 80(3.2)

-102G

1.0(0.039) 55 100(3.9)

-122G

1.2(0.047)

0.09

(0.9/ 13)

50 (1.8)

120(4.7)

-044G

0.4(0.016) 10 55(2.1)

-064G

0.6(0.024) 30 80(3.1)

-084G

0.8(0.032) 45 100(3.9)

-104G

1.0(0.039) 60 130(5.1)

-124G

Gravity

1.2(0.047)

0.10

(1.0/ 14)

0.07

(0.7 /10)

60 (2.2)

140(5.5)

Air

Ｇ

1/4

（NPS1/4）

Fluid

Ｇ1/8

205

(0.45)

※1. Atomizing air pressure means air pressure at gun inlet when trigger is pulled and air flows．

※2.Tested with 16sec / Ford cup #4 automotive repair paint.

This Anest-iwata spray gun kit complies to ATEX

regulations 94/9/EC,

Protection level ：

Ⅱ2 G X，Suitable for use in Zones 1 and 2.

X marking ：

Any static electricity discharge from the spray gun

is to be diverted to the grounded the conductive

air hose as stipulated

LPH-80

■

Important specifications

Max. Pressure

０．６８

ＭＰａ

６．８

ｂａｒ

９８

ＰＳＩ

Noise level

６０．３

ｄ

Ｂ

（Ａ）

Spray condition Recommended

Measuring point

1m backwards from gun,

１．６

m height

Max. Temperature

Atmosphere

５℃～４０℃

Air

・

Fluid

５℃～４３℃

This manual contains IMPORTANT WARNINGS and INSTRUCTIONS.

Equipment in this manual is exclusively for painting purposes.

Do not use for other purposes.

The operator shall be fully conversant with the requirements stated in this

instruction manual including important warnings, cautions and operation and

correct handling.

Read and understand the instruction manual, before use and retain for

reference.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - HVLP Compliant Spray gun

－ 1 － HVLP Compliant Spray gun Low Volume Low Pressure Important Be sure to observe warnings and cautions in this instruction m

Seite 2 - How to connect

－ 2 － Safety precautions Fire and explosion 1. Spark and open fl

Seite 3

－ 3 － How to operate Recommended paint viscosity differs according to paint property and painting conditions. 12 to 20 sec./Ford cup#4 is recomme

Seite 4 - Troubleshooting

－ 4 － Parts list No. Description Q’ty 1 Air cap 1 2 Packing 1 3 Cover 1 4 Fluid nozzle 1 5 Fluid needle set 1 6 needle packing set 1 7 Need

Kommentare zu diesen Handbüchern

Keine Kommentare

Anest-iwata LPH80 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Anest-iwata LPH80 herunter. Anest Iwata LPH80 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Anest-iwata LPH80